圖爾閥門認證
    新聞中心 NEWS

    免费排列5缩水软件:閥門種類術語,中英文對照

    來源于:美國圖爾閥門TOOE 13273期排列5 www.jqdajo.com.cn  發表時間:2015-10-31
    閥門種類術語
    Angle Stop Valves 角式截止閥
    Angle Throttle Valves 角式節流閥
    Angle Type Globe Valves 角式截止閥
    Butterfly Type Non-slam Check 蝶式緩沖止回閥
    Butterfly Valves with Gear Actuator 蝸輪傳動蝶閥
    Cock 二通
    CQ Thread Ball Valves CQ螺紋球閥
    Diaphragm Valves 隔膜閥
    Double Disc Flat Gate Valves 雙閘板平板閘閥
    Double Disk Parallel Gate Valves 明桿平行式雙閘板閘板
    Double Opening Exhaust Valves 雙口排氣球
    Electric Actuated Stop Valves 電動截止閥
    Electric Actuated Wedge Gate Valves 電動楔式閘閥
    Electric Double Disk Parallel Gate Valves 電動平行式雙閘板閘板
    Emergeny Cut-off Valves 緊急切斷閥
    Free Float Type Steam Trap 浮球式疏水閥
    Flange Ball Valves 法蘭球閥
    Flange Gate Valves 法蘭閘閥
    Flange Globe Valves 法蘭截止閥
    Gauge Valves 儀表閥
    Hard Seal Butterfly Valves 金屬密封碟閥
    High Temperature Pressure Power Station Gate Valves 高溫高壓電站閘閥
    High Temperature Pressure Power Station Globe Valves 高溫高壓電站截止閥
    Lift Check Valves 升降式止回閥
    Lift Check Valves 升降式止回閥
    Lining Ball Valves 襯里球閥
    Lining Butterfly Valves 襯里碟閥
    Lining Check Valves 襯里止回閥
    Lining Cock 襯里二通
    Lining Globe Valves 襯里截止閥
    Lining T-Cock Valves 襯里三通旋塞閥
    Liquid Indicator 液位計
    LPG Pipe Fitting 液化氣管件
    Magnetic Co-operate Globe Valves 磁耦合截止閥
    Magnetism Forle Pumps 磁力泵
    Manual Oil Pumps Valves 手搖油泵(閥)
    Meter Needle Type Globe Valves 儀表針形截止閥
    Oblique Stop Valves 直流式截止閥
    Parallesl Slide Valves 漿液閥
    Piping Centrifugal Pumps 管道離心泵
    Piping Pumps 管道泵
    Piping Safety Valves 管道安全閥
    Plunger Globe Valves 柱塞截止閥
    Quick Draining Valves 快速排污閥
    Restrictor Valves 過流閥(或節流閥)
    Safety Valves 安全閥
    Screw Pumps 螺桿泵
    Scum Gate Valves 排渣閘閥
    Single Disc Flat Gate Valves 單閘板平板閘閥
    Single Opening Exhaust Valves 單口排氣球
    Slurry Pumps 泥漿泵
    Stop Valves 截止閥
    Strainer 過濾器
    Submerged Motor Pumps 潛水電泵(排污泵)
    Swing Check Valves 旋啟式止回閥
    Swing Check Valves 旋啟式止回閥
    Tank Lorry Ball Valves 槽車球閥
    T-Cock 三通
    Thin Gate Valves 薄型閘閥
    Throttle Valves 節流閥
    Tiny Drag Slow Shut Check Valves 微阻緩閉止回閥
    Under Water Pumps 液下泵
    Vacuum Pumps 水力噴射器(真空泵)
    Vertical Lift Check Valves 立式止回閥
    Wafer Check Valves 對夾式止回閥
    Wafer Type Butterfly Valves with Rubber Itning 對夾式襯膠蝶閥
    Waste Valves 排污箱(閥)
    Water Seal Gate Valves 水封閘閥
    Wedge Gate Valves 楔式閘閥
    Y Type and Cylinder Filters Y型筒型過濾器
       
    2.零部件術語
    Axes Guide 軸套
    Ball 球、球芯
    Ball seat 密封圈
    Blowdown Sealing Face 啟、閥件密封面
    Body 閥體
    Bonnet 閥蓋
    Disc 閥瓣
    Mut 螺母
    Screw 螺栓
    Sealing 密封件
    Spring 彈簧
    Stem 閥桿
    Stem Mut 閥桿螺母
    Stem seal 填料
    Wedge Disc 閘板
       
    3.性能術語
    Applicable media 適用介質
    Applicable tempure 適用溫度
    Butt Clamp 對夾
    Chemical anaiysis 化學成份
    Connecting format 連接形式
    Double disc 雙閘板
    Flexible disc 彈性閘板
    Flange 法蘭
    Hoop 卡箍
    Inside theread 內螺紋
    Material chemical analysis and mechanical capacity 材料化學成份和機械性能
    materials 材料
    Materials for main parts 主要零件材料
    Mechanical capacity 機械性能
    Max. Discharging Capacity 最大排水量
    Max. Operating Temperature 最高工作溫度
    Max. Allowable Temperature 最高允許溫度
    Max. Allowable Pressure 最高允許壓力
    Model 型號
    Name of parts 零件名稱
    Nominal Pressure 公稱壓力
    Outside theread 外螺紋
    Oxidant 氧化性介質
    Parallet 平行
    Reductant 還原性介質
    Rising stem 明桿
    Seat testing pressure 壓力氣密封試驗壓力
    Socket 卡套
    Specifications 性能規范
    Single disc 單閘板
    Solid 剛性
    Strengh testing pressure 強度試驗壓力
    Steam , condensate 蒸汽,凝結水
    Water,oil,steam 水,溫度,氣
    Wedge 楔式
    Welding 焊接
       
    4.材料術語
    Buna-N rubber 丁晴橡膠
    Casting aluminium brass 鑄鋁黃銅
    Casting aluminium bronze 鑄鋁青銅
    CHR rubber 氯晴橡膠
    Chrominm-molybdenum-vanadium steel 鉻鉬釩鋼
    Chromium stainless steel 鉻不銹鋼
    Chromium-molybdenum steel 鉻鉬鋼
    Corrugation pad 波形墊
    Cuprum alloy 銅合金
    Ductile Cast iron 球墨鑄鐵
    Expanded graphite 柔性石墨
    Fine Steel Casting iron 優質碳素鋼
    Fluorous rubber 氟橡膠
    Gray Cast iron 灰鑄鐵
    Hayne’s alloy 鈷鉻鎢合金
    High tem perature steel 高溫鋼
    Low tem perature steel 低溫鋼
    Nylon 尼龍塑料
    Polytetrafluoroethylene 聚四氟乙烯
    Pure aluminum 純鋁
    Pure cupper 純銅
    Rubbeer graphite board 橡膠石墨板
    Spring steel 彈簧鋼
    Stainless acid-resisting steel 不銹耐酸鋼
    Stainless and Graphite 不銹鋼/石墨
    Stainless steel 不銹鋼
    Steel Casting iron 碳素鋼鑄件
    Shell Test Pressure 殼體試驗壓力
    Service Fluid 工作介質
    返回頂部